Xerox 721 Message Manual page 65

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
IF7901 CMT failed during IPF call x
CMT (character mapping table) could not be read from the
IPFNTS.SYS file. Either IPFNTS does not exist on the system or
the file is corrupted.
Action 1. Check if the IPFNTS.SYS file is on the system.
2. If IPFNTS.SYS is on the system, the file is corrupted.
Recompile the IPFNTS.JSL to replace the corrupted
IPFNTS.SYS file.
IF7902 CMT package error
An error occurred while the system was processing the character
mapping table, probably due to a disk error or insufficient space.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7903 FFM ADD command failed on file x
The font file management ADD command has failed on the
requested file.
Action 1. Retry the ADD command.
2. If the message reappears, contact your systems specialist or
Xerox Customer Service.
IF7904 FFM package will not open
The system is unable to open the IFUFFM.SYS file, probably due
to a disk error.
Action 1. Check if the IFUFFM.SYS file is on the system.
2. If IFUFFM.SYS is on the system, the file is probably
corrupted. Delete the IFUFFM.SYS file and retry the ADD
command to recreate the FFM file.
IF7905 GTMU allocation of font request memory failed
The system is unable to get adequate memory for the requested
font, probably due to a disk error or insufficient space.
Action 1. Compress the disk and retry the command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IF7907 IPM package will not open
The system cannot open the IPM package, probably due to a
disk error.
Action 1. Delete the IPM files on the system and recompile the
IPFNTS.JSL to recreate the IPM files.
2. Retry the command.
3. If the problem continues, contact your systems specialist or
Xerox Customer Service.
IFU (INTERPRESS FONT UTILITY) MESSAGES
5-27