Messages 1538 Through 1572 - Xerox 721 Message Manual

Messages 1538 through 1572

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
The following messages (1538 through 1572) are the results of
problems/warnings/status that could occur with the initialization
and startup of the PC UI.
1538 Configuration file cannot be found
The PC user interface configuration file is missing or cannot be
located on the hard disk.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1539 Config file read error
MS-DOS cannot read data from the PC user interface
configuration file.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1541 No keyword in configuration data
PC user interface files may be corrupted.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1542 Unrecognized configuration keyword
A keyword in the PC user interface configuration file is not in the
list of allowable keywords.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1543 No parameter data in configuration record
A statement in the PC user interface configuration file has a
keyword, but no data to the right of the "=" sign.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1544 Invalid mouse click rate
A double click interval of zero was specified.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
1545 Invalid mouse speed rate
An incorrect mouse speed was specified.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
4635 LPS ADDITIONAL MESSAGES
15-7