Xerox 721 Message Manual page 68

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-30
IF8104 CMT entry table has overflowed by map x
There was not enough space in the character mapping table
when adding the next entry.
Action Contact your systems specialist or Xerox Customer Service.
IF8105 CMT insufficient room in disk file (MAP x )
There is insufficient disk space for the requested character
mapping table.
Action Contact your systems specialist or Xerox Customer Service.
IF8106 CMT mapping x too big
The size of the indicated mapping exceeds the maximum size.
Action Contact your systems specialist or Xerox Customer Service.
IF8201 Error: from IPM_open ( )
The system is unable to open an IPM file.
Action 1. Delete all IPM files from the system.
2. Recompile IPFNTS.JSL to recreate the IPM files and retry the
command.
3. If the message reappears, contact your systems specialist or
Xerox Customer Support.
IF8202 Error: from FFM_open ( )
The system is unable to open the IFUFFM.SYS file (font file
management). Either the IFUFFM.SYS file is not on the system or
it is corrupted.
Action 1. If IFUFFM.SYS is on the system, it is corrupted and should be
deleted.
2. Retry the ADD command.
3. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8203 Error: from IPF_open ( )
The system is unable to open the IPFNTS.SYS file. Either the file
is not on the system or is corrupted or there is a software
problem.
Action 1. Check if the IPFNTS.SYS file is on the system.
2. If IPFNTS.SYS is on the system, it is corrupted and should be
deleted.
3. Retry the command.
4. If the problem continues, contact your systems specialist or
Xerox Customer Support.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE