Xerox 721 Message Manual page 13

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
1.
These messages may appear during the process of compressing
the system disk. (Refer to your 4635 LPS Operations Reference
chapter on managing LPS resources for additional information.)
CP1010 Compress now restoring the print file
The COMPRESS command was entered. The process has moved
the print file to different area of the system disk.
CP1020 Now processing DP0
CP1030 Now processing DP1
CP1040 Now processing DP2
CP1050 Now processing DP3
The COMPRESS command was entered. The system is currently
compressing the indicated disk pack unit.
Action None.
CP1800 Compress processor aborting
The ABORT command was entered during the compress process.
The system disk remains partially compressed.
CP1900 Insufficient working memory for compress
Not enough dynamic memory exists for the compress process.
Action Contact your systems specialist or Xerox representative regarding
obtaining additional memory capacity.
CP2010 Enter 'A' to abort or 'C' to compress other disks
Multiple disks IDs were specified in the COMPRESS command.
One of the system disks contains so many files that there is not
enough internal memory to load the COMPRESS task.
Action Enter A to abort compression.
or
Enter C to skip over the full disk and compress others specified
in COMPRESS command.
CP2700 Invalid keyin
The compress command was entered incorrectly.
Action Reenter command correctly
CP (COMPRESS command)
messages
1-1