Xerox 721 Message Manual page 278

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
Format used is incorrect for Clipboard. Change and try
again.
The PC Editor uses DOS files to edit and, with different formats
available on the PC UI, the Editor files need to be in ASCII DOS.
This message is to make the user aware that the file must be
converted to ASCII DOS.
Incompatible mode error while opening AUD File Mgr file.
Action If the problem persists, call Xerox Customer Service.
Inconsistent key flags between key segments.
Action If the problem persists, call Xerox Customer Service.
Incorrect AUD File Mgr data buffer descriptor for Extended
Get/Step operation.
Action If the problem persists, call Xerox Customer Service.
Incorrect field offset for Extended Get/Step operation.
Action If the problem persists, call Xerox Customer Service.
Initializing Client-Layer protocol
The system controller has established low-level communication
with the printer, and is now trying to establish high-level message
communication with the printer.
In-process record read is not Log Header.
The expected Audit Log header record was not read from the
audit log in-process file.
Action If the problem persists, call Xerox Customer Service.
In-process record read is not Page Detail.
The expected Page Detail record was not read from the audit log
in-process file.
Action If the problem persists, call Xerox Customer Service.
Insufficient data buffer reading in-process file for completion
copy.
A record in the in-process file is larger than the largest record
expected.
Action If the problem persists, call Xerox Customer Service.
Insufficient data buffer reading in-process file for deletion.
A record in the in-process file is larger than the largest record
expected.
Action If the problem persists, call Xerox Customer Service.
4635 LPS ADDITIONAL MESSAGES
15-35