Xerox 721 Message Manual page 24

HIP (HOST INTERFACE PROCESSOR) MESSAGES
4-2
HP0090 Job concatenation mode is 'ON'
In response to an operator command, HIP is now in a
concatenated job mode.
Action None.
HP0095 Job concatenation mode is 'OFF'
In response to an operator command, HIP is not in a
concatenated job mode.
Action None.
HP0100 Stopped online
The HIP STOP command was entered while the system was
online. Jobs will be accepted until the HIP buffer is full. No
further jobs will be accepted.
Action 1. Wait for message HP2100 to appear on the printer display.
2. Enter the HIP START command to print only jobs in the HIP
buffer.
HP0110 Stopped offline
The HIP STOP command was entered while HIP was offline from
the host. No processes were interrupted.
Action None.
HP0120 Job aborted: JOB ID xxxx
The HIP ABORT job command was entered. The job indicated
has been cancelled.
Action None.
HP0130 Log file reset
You have entered HIP LOG [RESET]. The system is informing you
that the log file has been cleared and all information had been
deleted.
Action None.
HP0210 Transmission aborted: JOB ID xxxx
The HIP ABORT command was entered. The job being sent has
been cancelled.
Action None.
HP1010 Input starting report - jid xx
This is displayed while in a concatenated job mode if the
concatenated job operator display mode is ON when input starts
a HIP job.
Action None.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE