Xerox 721 Message Manual page 174

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-98
OS7450 Graphic sample not allowed by JDE.
The graphic sample requested cannot be printed.
Action Recode your request. (Refer to your 4635 LPS PDL/DJDE
Reference.)
OS7465 Printer not capable of printing 600 SPI output.
A job requesting 600 spi output was attempted on a system that
does not support 600 spi output. The job cannot be printed.
Action None
OS7500 Insufficient memory messages.
The number of features specified in JDE requires more main
memory than is available; or multiple "DJDE JDE =" or "JDL ="
commands were incorrectly invoked in a single report.
Action 1. Recreate the job, reducing the number or extent of features.
or
Recode DJDE correctly. (Refer to your 4635 LPS PDL/DJDE
Reference.)
2. Restart the job.
OS7500 Insufficient memory for JDE.
OS7510 Insufficient memory for JDE Tables.
OS7520 Insufficient memory for VFU Tables.
OS7530 Insufficient memory for CME Tables.
OS7550 Insufficient memory for input buffers.
OS7551 Insufficient dynamic memory for PDE Table.
System dynamic memory is exhausted.
Action Check application and retry.
OS7600 DJDE/Delimiter file overflow.
The memory needed by input task to accomplish DJDE/Delimiter
processing exceeds the memory available.
Action 1. Reduce the complexity of form. (Refer to your 4635 LPS
Forms Creation Guide.)
2. Rerun the job to determine if failure is an intermittent
CPU/memory failure.
3. If the failure recurs, contact your systems specialist or Xerox
representative to obtain additional memory capacity. The job
cannot be processed without it.
OS7610 RTEXT File overflow.
The memory needed by the input task to accomplish Routing
Text processing exceeds memory available.
Action 1. Check the form and recompile if an error is found. (Refer to
4635 LPS Forms Creation Guide.)
2. Rerun the job to determine if the failure is an intermittent
CPU/memory failure.
3. If the failure recurs, recreate the job, reducing the RTEXT
parameters.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE