Xerox 721 Message Manual page 290

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
Too many audit reports to list. Try Jobs or filter.
The request to display a list of audit logs has exceeded the
maximum buffer size possible.
Action Retry the operation with filters to reduce the number of logs that
will be listed. Use the Jobs option to reduce the number of logs
that will be listed. If the problem persists, call Xerox Customer
Service.
Too many audit jobs to list. Try filter.
The request to display a list of audit logs has exceeded the
maximum buffer size possible.
Action Retry the operation with filters to reduce the number of logs that
will be listed. If the problem persists, call Xerox Customer
Service.
Trying to lock a file locked by another application
Action Finish and jobs that are currently printing and then reboot the
system.
Trying to lock a record locked by another application
Action Finish and jobs that are currently printing and then reboot the
system.
Unable to read the File. Try again
The system was unable to read the DOS file.
Unable to write the File. Try again
The console log record could not be written to disk due to
hardware consideration. The actions need to be repeated.
Variable length portion of page unreadable by Step Direct
operation.
Action If the problem persists, call Xerox Customer Service.
Waste Management signal but no output phase record exists.
Waste management data has been received while logging but no
phase record is active to enable the data to be logged.
Action If the problem persists, call Xerox Customer Service.
Write error during save.
The record manager has detected a write error during an Audit
Log save operation.
Action If the problem persists, call Xerox Customer Service.
4635 LPS ADDITIONAL MESSAGES
15-47