Xerox 721 Message Manual page 91

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS1134 Checking for existence of x.x on system
FEX is looking for the requested .FRM directory in the system's
memory. If FEX finds the requested form name, it will show
'FOUND' on the display.
Action None.
OS1135 FEX: Error, Form: x.x does not exist. Exiting.
FEX cannot find the requested .FRM directory in the system.
Action Verify the form directory (file-name) and retry the command.
OS1136 Sheet rotation: '0' = None or '1' = Rotate sheet:
This is one of a series of FEX questions about the test print job,
which also includes messages OS2922, OS2923, OS2924, and
OS2008.
Action Enter 0.
OS1137 Rotation will be set to x.
This message verifies that you have selected either rotation ('1')
or non-rotation ('0') of sheets for your FEX test print job.
Action None.
OS1150 Job queue full
Print queue cannot hold any more data.
Action Print or delete jobs in queue before more jobs are sent.
OS1155 Request rejected, diagnostic job already in progress
A diagnostic print job is already being processed; additional
requests are rejected.
Action None.
OS1160 No pages waiting to be drained
The DRAIN command was entered. No complete pages remain
in the print file or memory.
Action None.
OS1170 Invalid command while offline
An online only command was entered while the system is offline.
Action Place the system online to perform the desired function. (Refer
to the online chapter in your 4635 LPS Operator Guide.)
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-15