Xerox 721 Message Manual page 272

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
End or Abort Tran operation without Begin.
Action If the problem persists, call Xerox Customer Service.
EOR-Input with no prior SOR-Input.
An End Of Report signal has been received but no Start Of
Report signal preceeded it.
Action If the problem persists, call Xerox Customer Service.
EOR-Output with no prior SOR-Output.
An End Of Report signal has been received but no Start Of
Report signal preceeded it.
Action If the problem persists, call Xerox Customer Service.
EOR-Output but no output phase record exists.
End Of Report signal for this report cannot be matched with any
active phases in the auditor.
Action If the problem persists, call Xerox Customer Service.
Error changing directory
Action If the problem persists, call Xerox Customer Service.
Error closing report format output file.
The record manager is unable to close the output file that
contains the formatted audit log text. Audit logs cannot be
displayed or printed.
Action If the problem persists, call Xerox Customer Service.
Error extending AUD File Mgr file.
Action If the problem persists, call Xerox Customer Service.
Error opening report format output file.
The record manager is unable to open the output file that
contains the formatted audit log text. Audit logs cannot be
displayed or printed.
Action If the problem persists, call Xerox Customer Service.
Error writing formatted report to file.
Record manager encountered an error while writing the format
buffer to disk.
Action If the problem persists, call Xerox Customer Service.
Error writing AUD File Mgr cache buffer.
Action If the problem persists, call Xerox Customer Service.
4635 LPS ADDITIONAL MESSAGES
15-29