Xerox 721 Message Manual page 119

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS2008 CAUTION: paper size in selected tray has changed.
The paper size in a tray in the currently selected cluster has been
changed.
Action 1. Verify the change.
2. Change the paper, if desired.
3. Enter the CONTINUE O command or press the <CON> to
resume printing. (Refer to the chapter on feeder trays in
your 4635 LPS Operator Guide.)
OS2009 Both trays are full
The SELECT AUTO command was entered. After the first
destination output tray was filled, the system was unable to
switch output to the other tray because it was also full. Printing
stops.
Action 1. Unload both output trays. (Refer to the chapter on output
trays in your 4635 LPS Operator Guide.)
2. Press the <CON> key or the Continue button, or enter the
CONTINUE command to resume printing.
OS2010 Mount input tape; 'CONTINUE I' when ready
The START command was entered offline. (Magnetic tape may
already have been mounted.)
Action 1. Load the magnetic tape reel for the job to be printed if you
have not already done so. (Refer to the offline chapter in
your 4635 LPS Operator Guide.)
2. Enter the CONTINUE I command to start inputting data from
tape.
OS2020 Mount next volume 'CONTINUE I' when ready
A multivolume job is being processed. The system has
encountered the End of Volume magnetic tape label.
Action 1. Load the magnetic tape reel containing the next volume of
the report. (Refer to the offline chapter in your 4635 LPS
Operator Guide.)
2. Enter the CONTINUE I command to resume input.
OS2025 Remount volume n for next copy of report. CON I when
ready.
This message appears when making multiple copies of multi-
volume reports in a noncollate mode. This includes reports with
copy-sensitive CMEs and multicopy reports that exceed size of
print file, necessitating hand collation.
Action 1. Reload the magnetic tape reel containing the volume number
indicated. (Refer to the offline chapter in your 4635 LPS
Operator Guide.)
2. Enter the CONTINUE I command to resume input.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-43