Xerox 721 Message Manual page 191

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS9996 Unable to read executive file.
The system disk files required for proper operation of the system
appear to have been destroyed on the system disk.
Action 1. Reboot the system by pressing the Boot button, then
entering B.
2. If the message reappears, resysgen if authorized to do so
(refer to your 4635 LPS System Generation Guide),
or
Contact your systems specialist.
OS9997 Unable to find system files.
The disk files required for proper operation of the system appear
to have been destroyed on the system disk.
Action 1. Reboot the system by pressing the Boot button, then
entering B.
2. If the message reappears, resysgen if authorized to do so
(refer to your 4635 LPS System Generation Guide),
or
Contact your systems specialist.
OS9998 Unable to acquire memory for initialization.
Memory problems are sufficiently severe that there is not enough
memory to initialize the system at startup.
Action 1. Reboot the system by pressing the Boot button, then
entering B.
2. If the message reappears, contact your systems specialist or
Xerox Customer Service.
OS9999 System can not be operated.
A hardware problem has occurred that is sufficiently severe to
prevent operation of the system.
Action 1. Reboot the system by pressing the Boot button, then
entering B.
2. If message reappears, contact your systems specialist or
Xerox Customer Service.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-115