Xerox 721 Message Manual page 72

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-34
IF8302 IPM disk family x is too big
In an IFU IPFNTS command, this IPM name is too large to be
added to the IPM file on the system.
Action 1. Alter the JSL file if necessary, to specify a smaller IPM family
to be compiled.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8303 IPM family is too large: x
In an IFU IPFNTS command, this IPM name is too large to be
added to the IPM file on the system.
Action 1. Alter the JSL file if necessary, to specify a smaller IPM family
to be compiled.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8304 IPM storage request has failed
The amount of storage space requested is too large.
Action Contact your systems specialist or Xerox Customer Service.
IF8307 Interpress decomposer easy value error
There has been an error when reading easy values from the input
media.
Action Contact your systems specialist or Xerox Customer Service.
IF8401 FIS font request failed with EMT return code x
The FIS font request cannot be processed due to the EMT
(emulator trap) return code shown.
Action Contact your systems specialist or Xerox Customer Service.
IF8402 FIS initiation failed with EMT return code x
Initiation of FIS cannot be processed due to the EMT return code
shown.
Action Contact your systems specialist or Xerox Customer Service.
IF8403 FIS termination failed with EMT return code x
FIS termination cannot be processed due to the EMT return code
shown.
Action Contact your systems specialist or Xerox Customer Service.
IF8404 Font set is larger than Font_Set_Array_size limit
There is not enough memory to process the font set.
Action Contact your systems specialist or Xerox Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE