Xerox 721 Message Manual page 237

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
xDocument aborted because previous error may have been
unique to this copy.
During the processing of an IFCOPY body, an error was found.
Processing the document was ended.
Action 1. Address the prior messages.
2. Resend the document.
Font problem; bad font name; all blanks?
The currently-defined font family could not be processed. No
family substitution is attempted.
Font problem; Font "fileType>localFontName" unknown;
check "JSL>IPFNTS."
Font family mapping points to an LPS font that does not exist.
Action Reenter the ADD command for the FIS family
or
Load the LPS font file(s) from a backup source.
Font problem; font "interpressFontName" does not contain n
point (rotated n degrees) characters.
The Interpress family mapping does not contain the requested
orientation, or the user has turned off point size substitution and
the Interpress family mapping does not contain the requested
point size.
Action Invoke the FIS utility to add the desired orientation or allow point
size substitution for the Interpress family via the IFU SUBSTITUTE
command.
Font problem; font "interpressFontName" unknown.
The default family name, as specified in the font profile or
IPFNTS.JSL, does not have a mapping to LPS fonts defined for the
identified family.
Action Key in IFU ADD for the desired family or default family.
or
Key in IFU IPFNTS to add the mapping for the desired or default
family.
or
Request another font family in the document.
Font problem; form font "fileType>localFontName" not
found.
When processing a form, a font or logo which is not available on
the LPS was found.
Action Load the font or logo on the printer.
or
Modify the form appropriately.
SUMMARY SHEET ERROR MESSAGES
14-13