Xerox 721 Message Manual page 269

4635 LPS ADDITIONAL MESSAGES
15-26
Cannot allocate memory for report phase record during crash
recovery.
Insufficient Windows resources to allocate a report phase record
to support crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot allocate memory for waste management record.
Insufficient system memory exists to allocate memory for a waste
management record.
Action If the problem persists, call Xerox Customer Service.
Cannot expand memory region.
Insufficient system memory available to display a large list of
Audit Logs.
Action Try a filtered list of logs, if the problem persists, call Xerox
Customer Service.
Cannot find input phase to match output phase.
An output signal has been received that cannot be matched by
report number to its corresponding input.
Action If the problem persists, call Xerox Customer Service.
Cannot open in-process file for crash recovery.
The record manager is unable to open the in-process file to
support crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot open Master Directory file for crash recovery.
The record manager is unable to open the master directory file to
support crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot read in-process file during crash recovery.
The record manager has detected an error while reading the in-
process file to support crash recovery.
Action If the problem persists, call Xerox Customer Service.
Cannot save a log onto itself.
You cannot save a console log to hard disk under the name
"current log."
Action Save the log under a different name.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE