Xerox 721 Message Manual page 188

Laser printing system
Hide thumbs Also See for 721:
Table of Contents

Advertisement

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
thru OS9555-OS9560
6-112
OS9460-OS9550
"DISK ERROR" Messages.
An apparent fatal disk error occurred during the indicated
process. The job is aborted.
The printer control console displays:
OUTPUT STOPPED. SEE MESSAGE AT CRT.
Action
1. Restart the job. The message should not reappear if the
2. If the failure recurs, a problem with the system disk is
Note: CRT refers to the 4635 LPS system controller display.
OS9460
Disk error - OCS. Call for service.
OS9500
Bad block on disk - Input. Call for service.
OS9530
Disk error - Input. Call for service.
OS9531
Disk error - Processing DJDE's.
OS9532
Disk write error - RTEXT File.
OS9537
Disk error or unable to open grid/index font.
OS9540
Unable to open a directory file.
OS9542
File xxxx error - Unable to create file.
OS9543
File xxxx error - Writing to disk file.
OS9550
Disk error - Output. Call for service.
OS9555
Disk I/O Error copying IMG File to Print File.
OS9556
Unidentifiable disk error copying IMG File to Print File.
OS9560
Font memory write error. Call for service.
OS9551
Unable to recover from disk error. Resetting system.
A system disk error has occurred that prevents printing from
continuing. To minimize data loss, a system RESET is being
performed.
Action
In response to the RESET confirmation request, enter Y or press
the <ENTER> key. (Entering N to the confirmation request is
not supported.)
OS9700
Error detected while going offline.
A fatal error has been detected in the online interface when
going offline.
Action
1. Reboot the system by pressing the Boot button, then
2. Enter the ONLINE, then OFFLINE commands again.
3. If the failure recurs, contact your systems specialist or Xerox
OS9800
Hardware error/Disk - Input. Call for service.
A fatal system disk error has occurred in input.
Action
1. Restart the job.
2. If the failure recurs, contact your systems specialist or Xerox
failure was an intermittent memory error.
indicated. Contact your systems specialist or Xerox
Customer Service.
entering B.
Customer Service.
Customer Service.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE

Advertisement

Table of Contents
loading

This manual is also suitable for:

4635

Table of Contents