Xerox 721 Message Manual page 130

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-54
OS2600 Tape volume out of sequence; mount correct volume
Magnetic tape label number detected by sensors does not follow
previous volume number.
Action Remove tape and mount volume that is next in numerical order.
(Refer to your 4635 LPS Tape Formats Manual.)
OS2610 Improper ink-name list specification
The ink-name list you have specifed does not conform to ink-
name list syntax. For example, you may have used double
instead of single quotes to identify the ink-names.
Action Check the specifed ink-names and retry the job.
OS2611 More than 64 ink-names specified
The ink-name list you have specifed contains more than 64 ink-
names, the system's limit.
Action Restructure your commands to contain a maximum of 64 ink-
names.
OS2612 Invalid filetype for ink override file name
You have entered an incorrect override file-type. Only .TMP and
.MSC files are acceptable.
Action Retry the operation, using one of these two file-types.
OS2613 Ink parameter required on sample command
You have entered a command which is missing an ink-name or a
file containing an ink-name. In other words, the INK[S] keyword
is missing parameters.
Action Re-enter the command, using the needed parameters.
OS2614 File not found
The ink-name file specified in message "OS7190 PROBLEM WITH
FILE file-name.file-type" cannot be opened.
Action Verify the file-name and file-type you have specified and retry the
command.
OS2615 File I/O error
The system cannot recognize the ink-name file specified in the
message "OS7190 PROBLEM WITH FILE file-name.file-type."
Action Verify the file-name and file-type and retry the command.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE