Xerox 721 Message Manual page 122

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-46
OS2070 Paper Tray 2 is empty
No paper remains in feeder tray 2.
The printer control console displays one of the following:
BOTH TRAYS SET FOR _._X_._" PAPER
BOTH TRAYS SET FOR _X_MM PAPER
PAPER TRAY 2 IS EMPTY. TRAY 2 IS SET FOR _._X_._" PAPER
PAPER TRAY 2 IS EMPTY. TRAY 2 IS SET FOR _X_MM PAPER
PRINTER IS WARMING UP--PAPER TRAY 2 IS EMPTY-- PRESS i
Action Add paper to feeder tray 2. has. (Refer to the chapter on feeder
trays in your 4635 LPS Operator Guide.)
PRINTING--PAPER TRAY 2 IS EMPTY. BOTH TRAYS SET FOR
_._X_._" PAPER
PRINTING--PAPER TRAY 2 IS EMPTY. BOTH TRAYS SET FOR
_X_MM PAPER
READY TO PRINT--PAPER TRAY 2 IS EMPTY--PRESS i
TRAY 1 IS SET FOR _._X_._" PAPER. TRAY 2 IS SET FOR
_._X_._" PAPER
TRAY 1 IS SET FOR _X_MM PAPER. TRAY 2 IS SET FOR
_X_MM PAPER
1. Press the i button on the printer control console for
additional console messages if instructed to do so by the
printer control console display. (Refer to the chapter on
feeder trays in your 4635 LPS Operator Guide.)
2. Add paper to feeder tray 2. (Refer to the chapter on feeder
trays in your 4635 LPS Operator Guide.)
3. Press the <CON> key to resume printing.
OS2080 Paper Tray x is empty.
The paper tray indicated in the message is empty, thus causing
the printer to cycle down or preventing it from cycling up.
Action 1. Add paper to the tray indicated.
2. Restart the job.
OS2090 Trays 1 or 2 must be used for transparencies.
Trays 1 or 2 must be specified (separately or in a cluster) in order
to print your job on transparencies.
Action 1. Reenter the command, specifiying trays 1 or 2.
2. Enter the CONTINUE command to resume printing.
OS2091 No available trays are ready
The tray(s) available for your job are not ready to be used.
Possible causes may be that they are empty, have the wrong type
of stock, are not properly latched, etc.
Action Check the status of your trays, and correct as appropriate
or
Select different trays for the job.
OS2100 Main tray not ready
Feeder tray 1 has not risen completely.
Action Pull out the feeder tray and push it back in all the way. (The tray
rises automatically.)
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE