Xerox 721 Message Manual page 163

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
OS6722 DJDE processing error: maximum Forms/Fonts exceeded.
DJDE specified a PDE calling for forms and/or fonts in excess of
the system maximum.
Action 1. Recode the DJDE with fewer fonts/forms. (Refer to your
4635 LPS PDL/DJDE Reference.)
2. Restart the job.
OS6723 DJDE processing error/ insufficient memory messages.
Insufficient dynamic memory exists for the file called for by DJDE.
Depending on JSL coding for handling error conditions, one of
the following occurs:
Error = Stop
Job is interrupted, and message "INPUT STOPPED, ENTER CON I
OR ABORT I" appears.
Action Enter the CONTINUE I command to resume input (DJDE is
ignored) or ABORT I command to cancel the job.
Error = Abort
Job automatically aborts.
Action 1. Do one or more of the following: Recreate the job, reducing
the number of features, block size, and/or font or form
values.
and/or
Recode DJDE, specifying a different file. (Refer to your 4635
LPS Operations Reference for additional information.)
2. Restart the job.
Error = Continue
Printing continues and no further messages are displayed.
Action If job prints unsatisfactorily, follow instructions for ERROR =
ABORT, above.
OS6723 DJDE processing error: Insufficient memory for PDE.
OS6724 DJDE processing error: Insufficient memory for CME.
OS6725 DJDE processing error: Insufficient memory for VFU.
OS6726 DJDE processing error: Insufficient memory for JDE/JDL.
OS6727 DJDE processing error: Insufficient memory for Forms.
OS6728 DJDE processing error: Feed stock not in stockset
A DJDE FEED option calls out a stock that is not in the stockset
defined for the current cluster.
Action 1. Enter the FEED cluster name to specify a different cluster with
the desired stock.
or
Redefine the stockset to include the desired stock. (Refer to
your 4635 LPS PDL/DJDE Reference.)
2. For further recommended actions, refer to messages
OS6723-OS6727.
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-87