Xerox 721 Message Manual page 104

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-28
OS1540 Cannot space past start of job
One of the following commands was entered:
MOVE n BLOCKS
MOVE n FILES
SPACE n PAGES
SPACE n REPORTS
The system has reached the beginning of a job and cannot space
backward any farther.
Action None.
OS1550 Space or move function stopped by end of data
One of the following commands was entered:
MOVE n BLOCKS
MOVE n FILES
SPACE n PAGES
SPACE n REPORTS
The system cannot space or move forward over any more text
because no more data has been input.
Action None.
OS1551 Inappropriate disk file type specified
An incorrect disk file type has been entered.
Action Check the file type and reenter it correctly. (Refer to your 4635
LPS Operations Reference chapter on managing LPS resources
for additional information.)
OS1552 File does not exist
The file name entered has not been input or stored on system
disk.
Action Verify the file name and reenter it correctly.
or
If the message reappears, load the desired file to system disk.
(Refer to your 4635 LPS Operations Reference chapter on
managing LPS resources for additional information.)
OS1553 Insufficient file space for status/accounting
The CJF ACCOUNTING command was entered. Not enough disk
space remains to create a 2000 report file.
Action 1. Delete files to create more disk space.
2. Compress disk. (Refer to your 4635 LPS Operations
Reference chapter on managing LPS resources for additional
information.)
3. Reenter the accounting command.
XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE