Xerox 721 Message Manual page 213

XEROX 4635 LASER PRINTING SYSTEM MESSAGE GUIDE
**Only one line per TL supported**
A nonstandard FRM file has been used that is not supported by
SCALE.
Action Contact your systems specialist or Xerox Customer Support.
**Restoring previous file, xxxx, due to error(s)**
Due to error(s) already displayed, the previous file is being
restored.
Action Verify and reenter the desired command. (Refer to your 4635
LPS Operations Reference).
**Run font through fix on CD/IG Version 2 or higher**
The font must be modified through the FIX command before
scaling.
Action 1. Enter the appropriate FIX command. (Refer to your 4635 LPS
Operations Reference chapter on managing LPS resources for
additional information.)
2. Reenter the SCALE command.
The following "FONT FILE xxxx CANNOT BE SCALED..."
messages indicate that the resulting font or logo file exceeds the
capacity of the file format.
**FONT FILE, xxxx, CANNOT BE SCALED (BITMAP SIZE)**
**FEATURE NOT IMPLEMENTED: 600 -> 300 SCALING**
**FONT FILE, xxxx, CANNOT BE SCALED (ALIGNMENT FIELD)**
**FONT FILE, xxxx, CANNOT BE SCALED (yBYTES FIELD)**
**FONT FILE, xxxx, CANNOT BE SCALED (xBITS FIELD)**
**FONTS FILE, xxxx, CANNOT BE SCALED (FMA FIELD)**
**FONT FILE, xxxx, CANNOT BE SCALED (ESCAPEMENT FIELD)**
Scaling bitmap.
The font or logo bitmap is being scaled.
Action None.
Scaling font: xxxx to: yyyy
The requested font is being scaled to the name shown in the
message.
Action None.
Scaling form: xxxx
The requested form is being scaled.
Action None.
Scaling FST entry.
The font or logo specification table is being scaled.
Action None.
SCALE COMMAND MESSAGES
11-5