Compactflash® Card Setup Jumper; Figure 4-5: Clear Cmos Jumper; Table 4-3: Clear Cmos Jumper Settings - IEI Technology KINO-PVN-D5251 User Manual

KINO-PVN-D5251/D4251/ Mini ITX SBC
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in
Clear CMOS
Short 1 - 2
Short 2 - 3

Table 4-3: Clear CMOS Jumper Settings

The location of the clear CMOS jumper is shown in

Figure 4-5: Clear CMOS Jumper

4.6.3 CompactFlash® Card Setup Jumper
Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting
Open
Closed
Table 4-4: CompactFlash® Setup Jumper Settings
T able 4-3.
6
Description
Keep CMOS Setup Default
Clear CMOS Setup
JCF1
2-pin header
See Table 4-4
See Figure 4-6
Description
Slave
Master
F igure 4-5 below.
6
Page 45