Jumper Settings; Clear Cmos Jumper; Table 4-1: Jumpers - IEI Technology KINO-PV-D5253-D4253 User Manual

K INO-P V-D5253-D4253 Mini-IT X Motherboard
4.4 J umper S ettings
NOT E :
A jumper is a metal bridge used to close
an electrical circuit. It consists of two or
three metal pins and a small metal clip
(often protected by a plastic cover) that
slides over the pins to connect them. To
CLOSE/SHORT
connecting the pins of the jumper with
the plastic clip and to OPEN a jumper means removing the plastic clip
from a jumper.
The KINO-PV-D5253/D4253 includes one jumper shown in Table 4-1.
Des c ription

Clear CMOS jumper

USB6,7 power
RS232/422/485 setting
RS422/485 TX setting

Table 4-1: Jumpers

4.4.1 C lear C MOS J umper
J umper L abel:
J umper T ype:
J umper S ettings :
J umper L oc ation:
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
and then move back to the default position.
a jumper means
L abel T ype
J_CMOS1 3-pin header
J66 3-pin header
JCOM61 6-pin header
JCOM62 6-pin header
J _C MOS 1
3-pin header
See Table 4-2
See Figure 4-2
P age 41