Clear Cmos Jumper; Figure 4-2: At/Atx Power Selection Jumper Location; Table 4-2: At/Atx Power Selection Jumper Settings; Table 4-3: Clear Cmos Jumper Settings - IEI Technology WAFER-CV-D25501 Series User Manual

WAFER-CV-D25501/N26001 3.5" SBC
The AT/ATX power selection jumper specifies the system power mode as AT or ATX.
Setting
Short 1-2
Off

Table 4-2: AT/ATX Power Selection Jumper Settings

Figure 4-2: AT/ATX Power Selection Jumper Location

4.4.2 Clear CMOS Jumper

Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
and then move back to the default position.
Setting
Short 1-2
Short 2-3

Table 4-3: Clear CMOS Jumper Settings

Description
Use ATX power (Default)
Use AT power
JP3
3-pin header
See Table 4-3
See Figure 4-3
Description
Normal
Clear BIOS
Page 43