Cpu, Cpu Cooling Kit And Dimm Installation - IEI Technology WSB-9152 User Manual

All the items in the packing list are present
The CPU is installed
The CPU cooling kit is properly installed
A compatible memory module is properly inserted into the slot
The jumpers have been properly configured
The WSB-9152 is inserted into a chassis with adequate ventilation
The correct power supply is being used
The following devices are properly connected
o
IDE device
o
SATA drives
o
Keyboard and mouse cable
o
Audio kit
o
Power supply
o
USB cable
o
Serial port cable
o
Parallel port cable
The following external peripheral devices are properly connected to the
chassis:
o
VGA screen
o
LAN connection

5.3 CPU, CPU Cooling Kit and DIMM Installation

WARNING:
A CPU should never be turned on without the specified cooling kit
being installed. If the cooling kit (heat sink and fan) is not properly
installed and the system turned on, permanent damage to the CPU,
WSB-9152 and other electronic components attached to the system
may be incurred. Running a CPU without a cooling kit may also result
in injury to the user.
The CPU, CPU cooling kit and DIMM are the most critical components of the WSB-9152.
If one of these component is not installed the WSB-9152 cannot run.
Page 74
WSB-9152 PICMG 1.0 SBC