Vga Monitor Connection; Figure 4-13: Usb Device Connection - IEI Technology WSB-PV-D4251 User Manual

WSB-PV-D4251/D5251 SBC

Figure 4-13: USB Device Connection

Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the on-board connector.

4.8.4 VGA Monitor Connection

The WSB-PV-D4251/D5251 has a single female DB-15 connector on the external
peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the WSB-PV-D4251/D5251, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA
insert the male connector from the VGA screen into the female connector on the
WSB-PV-D4251/D5251. See Figure 4-14.
Step 0:
connector. Once the connectors are properly aligned with the
Page 51