Figure 5-20: Usb Connector; Vga Monitor Connection - IEI Technology PICOe-945GSE User Manual

Series "A" receptacle connectors are shown in Chapter 3.
Step 2: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
5-20.Step 0:

Figure 5-20: USB Connector

5.8.4 VGA Monitor Connection

The PICOe-945GSE has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the PICOe-945GSE, please follow the instructions below.
Step 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3: Insert the VGA connector. Once the connectors are properly aligned with the
Page 88
PICOe-945GSE Half-Size CPU Card
F igure
8 6 2 H 8 2 5 H