Usb Device Connection; Vga Monitor Connection; Figure 5-23: Usb Device Connection - IEI Technology WSB-9152 User Manual

5.7.2 USB Device Connection

There are two external USB 2.0 connectors. Both connectors are perpendicular to the
WSB-9152. To connect a USB 2.0 or USB 1.1 device, please follow the instructions below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the WSB-9152. See Figure 5-22.

Figure 5-23: USB Device Connection

Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector.

5.7.3 VGA Monitor Connection

The WSB-9152 has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the WSB-9152, please follow the instructions below.
Page 100
WSB-9152 PICMG 1.0 SBC
Step 0: