1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Single board computers
  5. WSB-PV-D4251
  6. User manual

Usb Device Connection (Single Connector); Figure 4-12: Lan Connection - IEI Technology WSB-PV-D4251 User Manual

Full-size picmg 1.0 intel atom processor d525/d425 ddr3 up to 4gb, vga/ldvs, dual pcie gbe four rs-232 ports, three sata 3gb/s ports seven usb 2.0, rohs, audio
Hide thumbs
Table of Contents

Advertisement

Step 1:
Locate the RJ-45 connectors. The locations of the USB connectors are shown
in Chapter 4.
Step 2:
Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the WSB-PV-D4251/D5251. See Figure 4-12.

Figure 4-12: LAN Connection

Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.

4.8.3 USB Device Connection (Single Connector)

There are one external USB 2.0 connector. To connect a USB 2.0 or USB 1.1 device,
please follow the instructions below.
Step 1:
Located the USB connector. The location of the USB connectors is shown in
Chapter 4.
Step 2:
Align the connectors. Align the USB device connector with the connector on
the WSB-PV-D4251/D5251. See Figure 4-13.
Page 50
WSB-PV-D4251/D5251 SBC
Step 0:

Advertisement

Table of Contents
loading

Related Manuals for IEI Technology WSB-PV-D4251

Related Content for IEI Technology WSB-PV-D4251

This manual is also suitable for:

Wsb-pv-d5251

Table of Contents