Wafer-To-Ps/2 Cable (Keyboard/Mouse Installation); Figure 5-20: Sata Power Drive Connection - IEI Technology WSB-9152 User Manual

WSB-9152 PICMG 1.0 SBC

Figure 5-20: SATA Power Drive Connection

5.6.9 Wafer-to-PS/2 Cable (Keyboard/Mouse Installation)

The optional wafer-to-PS/2 cable respectively connects the onboard keyboard wafer
connector and the onboard mouse wafer connector to a PS/2 keyboard and a PS/2 mouse.
To connect the wafer-to-PS/2 cable, please follow the steps below.
Step 1: Locate the connector. The location of the keyboard/mouse connector is shown
in Chapter 4.
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the WSB-9152 keyboard or mouse connector. See Figure 5-21.
Step 3: Insert the cable
the keyboard/mouse connector on the WSB-9152, connect the cable connector
to the onboard connectors. See Figure 5-21.
connectors. Once the cable connector is properly aligned with
Page 97