Table of Contents
Advertisement
Observe the following when running tests:
► Prevent the presence of other persons in the potentially dangerous area around the test object.
► If necessary, perform appropriate additional safety precautions according to the relevant standard,
for example, by defining a high-voltage area around the test object and securing this area against
unauthorized access by using a barrier chain and warning sign.
► Start the test only if all safety precautions were taken and if you are absolutely sure that no other
person is present in the potentially dangerous area around the test object.
1.4
Power supply
Supply CT SB2 only from a power outlet that is equipped with protective ground (PE). Instead of
supplying CT SB2 from phase-neutral, it may also be supplied from phase-phase. However, the voltage
must not exceed 240V AC.
1.5
Orderly measures
The CT SB2 User Manual or alternatively the e-book has always to be available on the site where
CT SB2 is being used.
The CT SB2 users must read this manual before operating the device and observe the safety
instructions and all relevant instructions for connection and operation.
CT SB2 may only be used in accordance with the user documentation (including but not limited to user
manuals, reference manuals, getting started manuals and manufacturer manuals). The manufacturer
and the distributor are not liable for damage resulting from improper usage.
Opening CT SB2 or its accessories without authorization invalidates all warranty claims. Any kind of
maintenance, calibration or repair on the device itself may only be carried out by persons authorized
by OMICRON.
1.6
Disclaimer
If the equipment is used in a manner not described in the user documentation, the protection provided
by the equipment may be impaired. The manufacturer and the distributor are not liable if the safety
instructions given in this manual or any of the relevant international, national, company-internal or local
safety standards and rules are not observed.
1.7
Compliance statements
Declaration of conformity (EU)
The equipment adheres to the guidelines of the council of the European Community for meeting the
requirements of the member states regarding the electromagnetic compatibility (EMC) directive, the
low voltage directive (LVD) and the RoHS directive.
FCC compliance (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
OMICRON
Safety instructions
9
Advertisement
Chapters
Table of Contents
