Editing A Card; The Main Menu - Omicron CT SB2 User Manual

6.1.3

Editing a card

To open the edit mode for a displayed card, press the
highlighted (see Figure 6-3). Use the cursor keys to move the cursor and to select the desired edit field.
Some edit fields have soft keys assigned. The soft keys available for an edit field are displayed if the field
is selected.
Edit field
Edit field selected
Figure 6-3: Edit field selected in the CT-Object card
Proceed as follows to edit a card:
1. Select the edit field using the cursor keys.
2. Enter or edit the value or text:
► Select an entry offered by the soft keys (if available)
► or enter the value or text using the keyboard and then press the
or use the
ESC
3. Leave the edit mode either by moving the cursor to the card's tab using the
pressing the
ESC
6.2

The main menu

The main menu can be opened from any test card by pressing the Main soft key.
The items in the list can be selected using the
is selected (highlighted), the soft keys are labeled with the functions available for
this specific item.
Figure 6-4: Main Menu page
OMICRON
key to leave an edit field without applying and saving the entry.
key. The focus is then set to the card's tab again (tab highlighted).
Operating and configuring CT Analyzer
cursor key. The card's tab is then no longer
Display field
(selection not possible)
cursor keys. When an item
key to confirm your input
cursor key or by
How to get there:
Press the Main soft key in
any test card
-> Main Menu
63