Mr-Results Card For Mr Test Mode; Available Soft Keys; Ratio Results And Excitation Results - Omicron CT SB2 User Manual

CT SB2 User Manual
8.3

MR-Results card for MR Test mode

After the multi-ratio test is finished, the MR-Results card shows the measurement results for each tap
combination and/or intertap combination enabled for testing in the MR-Config. card.
If necessary, use the
Figure 8-3: MR-Results card with measurement results: Page for ratio results (left) and page for
excitation results (right)
8.3.1

Available soft keys

The following soft keys are available in the MR-Results card.
Table 8-4: Soft keys available in the MR-Results card
Soft key Description
Use this soft key to switch between the ratio results and the excitation results.
If the ratio results are displayed, the soft key is labeled Show Excit. to display the
excitation results.
If the excitation results are displayed, the soft key is labeled Show Ratio to display the
ratio results.
Using this soft key you can switch the unit for the phase error ("Pol. (')" column)
between minutes and degrees.
If the phase error is displayed in minutes, the soft key is labeled Pol. in Degrees. If the
phase error is displayed in degrees, the soft key is labeled Pol. in Min..
Using this soft key you can display the intertap combinations instead of the tap
combinations.
If the tap combinations are displayed, the soft key is labeled Show Inter Taps. If the
intertap combinations are displayed, the soft key is labeled Show Taps.
8.3.2

Ratio results and excitation results

The measurement results are displayed on two different pages (see Figure 8-3 on page 40). You can
toggle these pages using the Show Excit. or Show Ratio soft key.
The following table lists the ratio results displayed in the MR-Results card.
40
cursor keys to scroll the display.
OMICRON