Short Guide (Ct Test Mode) - Omicron CT SB2 User Manual

CT Analyzer User Manual
4.1

Short guide (CT Test mode)

Set up CT Analyzer
-> 3.2 on page 25
Switch CT Analyzer on.
Select New CT Test from
main menu
-> 4.2.2, step 1. on page 49
Enter the CT name plate data
-> 4.2.2, step 3. on page 49
Start the test
-> 4.2.2, step 4. on page 50
Automatic test execution
Test finished message
-> 4.2.2, step 7. on page 50
View the results
-> 4.2.3 on page 51
Disconnect or perform new test
-> 4.2.4 on page 51
Figure 4-1: Short guide for testing in CT Test mode
48 OMICRON