Inputs And Outputs - Omicron CT SB2 User Manual

CT Analyzer User Manual
2.3.5

Inputs and outputs

WARNING
Death or severe injury caused by high voltage possible
As long as the red LED of the
can occur due to the high energy stored in external inductors.
► Do not touch the test object or the measurement leads while the red LED is flashing.
► Wait until the red LED is off and the green LED is on before touching the measurement
setup.
Figure 2-5: Inputs and outputs of CT Analyzer
18
key is flashing, the output is active and lethal voltages
OUTPUT
Generator output.
AC: 40V , 5A
rms rms
DC: 120V, 5A (15A )
peak
SEC
Measurement input for secondary side of CT, 300V
PRIM
Measurement input for primary side of CT, 30V
max.
AC
max.
AC
OMICRON