Working In The File System - Omicron CT SB2 User Manual

6.10.2

Working in the file system

After selecting one of the available file operation functions in the File Menu, the file
system card is displayed showing the current path in its title bar and the file system
elements in the card area (refer to Figure 6-15).
Navigating in the file system
► To open a folder, select its entry (see Figure 6-15, left) using the
keys and then press the
► To go one level higher in the directory structure, select the "one level higher"
entry and then press the
Figure 6-15: File system card for loading a report
Creating a new folder
Creating a new folder is only possible for the functions Save As and Paste File(s)
of the File Menu.
To create a new folder in the file system, select Save As or Paste Files(s) in the
file menu and then navigate to the desired location in the file system where you
want to create the new folder. Then press the New Dir soft key. A new folder with
an empty name is created. Enter a name for the folder and press the
Figure 6-16: File system card after creating a new folder
Note: In the CT Analyzer file system, a directory can contain a maximum of 240 files and the maximum
file name length is 240 characters. Renaming of folders is not supported by CT Analyzer.
OMICRON
key.
key.
Operating and configuring CT Analyzer
cursor
key.
How to get there:
Press the Main soft key in
any test card
Main Menu:
- File Handling
Select soft key
File Menu:
- Load Report or
- Save As or
- Delete File or
- Rename File or
- Copy File(s) or
- Cut File(s) or
- Paste File(s)
How to get there:
Press the Main soft key in
any test card
Main Menu:
- File Handling
Select soft key
File Menu:
- Save As or
- Paste File(s)
77