Update Text - Omicron CT SB2 User Manual

CT Analyzer User Manual
6.9.2

Update text

Note: Instead of using the Update Text function of CT Analyzer you can also use
the Device Update function of the CT Analyzer Suite software. For detailed
information, please refer to the CT Analyzer Suite help.
Using this function you can install a new user interface language file. The new
language installed is then available for selection in the Language page.
Figure 6-12: File system card for selecting a new language file
To install a new language, select the corresponding file CTUser_xxx.bin in the A:\OMICRON\ directory
on the Compact Flash card using the
English is contained in the firmware and does not require a user language file.
NOTICE
Equipment damage or loss of data possible
► Do not install a language file that does not belong to the same package as the installed firmware
version. The user interface may become unreadable.
► Only install language files that are included in the package of the installed firmware version.
Refer to the OMICRON website for available languages or ask your distributor for a special language file.
If the text update process is interrupted or fails, the device displays an error message and automatically
resets the user interface to English when it is switched on the next time.
Press Abort to return to the Tools Menu page without installing a new language.
74
cursor keys and press the Select soft key.
How to get there:
Press the Main soft key in
any test card
Main Menu:
- Tools
Select soft key
Tools Menu:
- Update Text
-> File system card
OMICRON