Operating And Configuring Ct Analyzer; Working In The User Interface; Displaying A Specific Card; Using The Soft Keys - Omicron CT SB2 User Manual

CT Analyzer User Manual
6

Operating and configuring CT Analyzer

6.1

Working in the user interface

6.1.1

Displaying a specific card

To display a specific card, select the card by pressing the card selection keys
The card's tab showing the name of the selected card is then highlighted (see Figure 6-1).
Figure 6-1: CT-Object card selected
6.1.2

Using the soft keys

Using the soft keys you can operate CT Analyzer and change the user interface level of the software.
The functionality of the soft keys is context-dependent, i.e., the software offers different functions or
selectable sets of parameters depending on the focus (i.e., depending on which card or field is
highlighted or selected in the user interface).
If the lowermost soft key description field contains 3 points (see Save As in Figure 6-1), additional soft
key functions are available. Then you can switch the set of displayed soft keys using the
located below the soft keys (see Figure 6-2).
1st set of soft keys
Figure 6-2: Switching the set of soft keys in the CT-Object card
62
Press
.
...
2nd set of soft keys
key
OMICRON