Hardware; Functional Components Of Ct Sb2 - Omicron CT SB2 User Manual

CT SB2 User Manual
3

Hardware

3.1

Functional components of CT SB2

PC and CTA BURDEN
interfaces IN:
OUT: Generator output for burden measurement.
A green LED lights up when the output is active.
See also Figure 3-2
Equipotential
bonding connector
Mains connection unit
Mains socket with fuse and ON/OFF switch
Figure 3-1: CT SB2 overview
12
Measurement input for burden measurement.
PRIM
IN: Measurement input for primary
side of the CT.
OUT: Generator output for primary
winding resistance
measurement.
A green LED lights up when the
output is active.
TAPS
Terminals for connection of CT taps X1 to X6.
Connect each CT tap to both sockets!
A green LED lights up to indicate which
input/output is currently active.
CT ANALYZER
Input and output terminals for connection to
the CT Analyzer measurement inputs and
generator output.
LEDs
I/0 Green power LED. Indicates that CT SB2 is
switched on and ready for operation.
Status LED.
OMICRON