Omicron CT SB2 User Manual page 184

CT Analyzer User Manual
819.xxx Warning [819.xxx] File name contains an invalid character.
Reason:
Solution:
820.xxx Error [820.xxx] Memory management error. Contact the next OMICRON service center.
Reason:
Solution:
821.xxx Error [821.xxx] Could not update firmware.
Reason:
Solution:
823.xxx Error [823.xxx] Could not update user text!
Reason:
Solution:
824.xxx Error [824.xxx] An internal software error has occurred at address xxxxxxxH. To log this error,
make sure that a CF card is inserted and then press OK. Please send the file \OMICRON\
ErrorLog.xml on the CF card to the next OMICRON service center.
Reason:
Solution:
825.xxx Warning [825.xxx] Size of file [FileName] >= 1Mbyte.
Reason:
Solution:
826.xxx Error [826.xxx] The CT standard of the loaded report is not supported by the current firmware
version. Please check for a CT Analyzer firmware update.
Reason:
Solution:
830.xxx License < ... > is invalid.
Reason:
Solution:
831.xxx Setting value for < ... > is invalid. The default value of < ... > is used.
Reason:
Solution:
832.xxx Lifetime of relays near end. Contact the next OMICRON service center soon to arrange a hardware
service.
Reason:
Solution:
833.xxx You are about to load a report with an invalid hash code. Some measurement values may not be
authentic.
Reason:
Solution:
834.xxx No valid license was found in this file!
Reason:
Solution:
182
An invalid character was used to specify the file name.
Invalid characters: \ / : * ? \ < > |
Only use valid characters for the file name.
Memory management error.
Switch the CT Analyzer off, wait a second then switch it on again. If this error occurs more
frequently, you should contact your next OMICRON service center.
An error has occurred in the boot loader software.
Insert a Compact Flash card with valid software (CTAnalyzer.bin) in the directory
A:\Omicron\ and switch the CT Analyzer off and on again.
An error has occurred in the user text loader software.
Insert a Compact Flash card with valid software (CTUser_xxx.bin) in the directory
A:\Omicron\ and try again.
Invalid result in a floating point operation (NaN).
Contact your next OMICRON service center.
The size of the file copied to the CT Analyzer Compact Flash card or virtual disc is > 1 MB.
Avoid transfer of large files > 1 MB to the CT Analyzer.
You are trying to load a report that makes use of a CT standard your current firmware
version of CT Analyzer does not support.
Perform a firmware update to the latest version for your CT Analyzer.
An invalid license entry was found in the license file Omicron.lic on the CF Card.
Specify a valid license key.
Invalid item in file Settings.inf.
The file Settings.inf in the Omicron directory on the CF card of the CT Analyzer has a
formatting error in one of the parameters. Delete this file and check the settings in the menu
Main Menu -> Settings -> Misc. Settings. If necessary, change the settings and store the
file again.
The relays inside the CT Analyzer near the end of their lifetime (more than 1,000,000
measurements performed).
Arrange a hardware service in order to replace the relays.
The file checksum is not valid.
Check the authenticity of the report file loaded.
No valid license found.
Check the license file. The license possibly does not correspond to the serial number of
the CT Analyzer.
OMICRON