Chapter 6 Performing Tests And Measurements - Viavi CX100 ComXpert Operation Manual

Performing Tests and Measurements
Chap ter 6
This chapter provides step by step instructions for configuring the CX100 to perform the
following tests:
• CX100 Self Test Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
• FM Transmitter Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
• AM Transmitter Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10
• FM Receiver Performance Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16
• AM Receiver Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-22
• Performing VSWR/DTF Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28
• Performing Distance to Fault (DTF) Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-31
This chapter does not provide instructions for navigating or accessing functions, nor does
it contain detailed information about test and measurement functions and settings. Refer
to the following chapters for applicable information:
See Chapter 3 "System and Utility Function Descriptions"
system utility panels and parameters.
See Chapter 4 "Configuring System Settings"
See Chapter 5 "RF Instrument Function Descriptions"
test and measurements panels and parameters.
22144015
August 2023
for procedures to configure system settings.
CX100 ComXpert Operation Manual
6
for detailed descriptions of the
for detailed descriptions of the RF
Rev 002
6 - 1