Viavi CX100 ComXpert Operation Manual page 128

5.2.7.3.2 Meter Measurement Types
Each meter supports live, maximum, minimum and average measurements. A small
text indicator is located on each meter block which indicates the measurement type
being displayed on the meter.
Live Measurement
When Live is selected, the meter displays the measured value of the signal at
that given point in time. The meter updates continuously as long as the device
is receiving an incoming signal.
Max Measurement
When Max is selected, the meters displays the highest reading detected at
that point in time.The meter updates when/if a reading is detected that is
higher than the currently displayed measurement.
Min Measurement
When Min is selected, the meters displays the lowest reading detected at that
point in time. The meter updates when/if a reading is detected that is lower
than the currently displayed measurement.
Average Measurement
When Average is selected, a field is enabled which is used to define the
number of readings acquired to calculate the average measurement. The
meter reading updates each time the defined number of measurements has
been processed.
22144015
August 2023
CX100 ComXpert Operation Manual
Chapter 5 RF Instrument Function Descriptions
RF Test
Rev 002
5 - 19