Table of Contents
Advertisement
8.5
Operator Level Maintenance
The following procedures may be performed by the Operator. All other service must be
performed by Qualified Service Personnel.
CAUTION
This device does not contain user serviceable parts. Servicing should only be performed
by Qualified Service Personnel.
Mise en Garde
Cet appareil ne contient pas de pièces pouvant être entretenues par l'utilisateur.
L'entretien doit seulement être effectué par du personnel de service qualifié.
CAUTION
Do not operate this device with the case/cover open. Opening the case/cover exposes
the operator to electrical hazards which can result in electrical shock or damage to the
device.
Mise en Garde
N'utilisez pas cet appareil avec le boîtier/couvercle ouvert. L'ouverture du
boîtier/couvercle expose l'utilisateur à des risques électriques qui peuvent entraîner un
choc électrique ou des dommages à l'appareil.
8.5.1 Visual Inspections
Visual inspections should be performed periodically depending on operating environment,
maintenance and use.
•
Check for presence and condition of all warning labels and markings and supplied
safety information.
•
Inspect connectors for dirt, dust, corrosion or rust.
•
Inspect the device and accessories for damage. Do not use if there is damage to the
exterior of the unit or power accessories.
8.5.2 External Cleaning
•
Remove grease, fungus and ground-in dirt from surfaces with soft lint-free cloth
dampened (not soaked) with isopropyl alcohol.
•
Remove dust and dirt from connectors with soft-bristled brush.
•
When not in use, cover the connectors with suitable dust cover to prevent tarnishing
of connector contacts.
22144015
August 2023
CX100 ComXpert Operation Manual
Chapter 8 Care, Maintenance, and Troubleshooting
Operator Level Maintenance
Rev 002
8 - 5
Advertisement
Table of Contents
Troubleshooting
