Table of Contents
Advertisement
Chapter 2 Getting Started: Setup and Operation
Device Control and Operation
2.3.2 Turning the Device OFF
1.
Press and hold the Front Panel Power button for approximately 3 seconds, then
release.
2.
The device performs a series of power-down processes.
3.
When the power down process is finished, the front panel LEDs will no longer be
illuminated.
2.4
Device Control and Operation
The CX100 can be operated locally using the device's LCD touchscreen and front panel
controls, or remotely using a VNC (Virtual Network Computing) viewing application.
2.4.1 Local Operation
The OneExpert User Interface (UI) is designed to be intuitive and easy to use. The Liquid
Crystal Display (LCD) is a capacitive touchscreen that operates similarly to a mobile
device. The touchscreen supports gestures such as press to open/select/activate, press
and hold, press and drag, swipe sideways and pinch to zoom.
2.4.2 Remote Operation
The CX100 can be controlled from a remote location such as a laptop using a VNC viewing
application. See the following sections for additional information:
•
See section 4.5, "Remotely Operating the Device", on page 4-16
configure the device for remote operation.
•
See section 3.1.3, "Remote Operation Panel", on page 3-5
about remote operation controls and parameters.
2.5
UI Navigation, Control and Layout
This section describes layout of the CX100 User Interface (UI) and how to navigate
between system and test applications and functions. The CX100 UI is designed to be
intuitive and easy to use. The Liquid Crystal Display (LCD) is a capacitive touchscreen that
operates similarly to a mobile device. The touchscreen supports gestures such as press
to open/select/activate, press and hold, press and drag, swipe sideways, and pinch to
zoom.
Rev 002
2 - 8
CX100 ComXpert Operation Manual
for instructions to
for detailed information
22144015
August 2023
Advertisement
Table of Contents
Troubleshooting
