Viavi CX100 ComXpert Operation Manual page 99

Chapter 4 Configuring System Settings
Establishing a Network Connection
When all settings have been configured, select the
network connectivity. The device establishes an Ethernet connection to the LAN.
4.4.1.2.3 IPv6 Network Mode Settings
IPv6 Address Mode
DHCPv6
Stateless
Static
When all settings have been configured, select the Network ON/Off soft-key to enable
network connectivity. The device establishes an ethernet connection to the LAN.
Rev 002
4 - 12
Setting
No additional settings.
IPv6 DNS Address Mode
• DHCPv6: no additional settings to specify.
• Manual: specify the IPv6 DNS Server address.
IPv6 DNS Server
•
Enter the address of the DNS server.
IPv6 Global Address
•
Enter the device's IPv6 address to access the
global network.
IPv6 Local Address
• Manual: Enter the IPv6 Local Address.
• Automatic: Address is populated automatically.
IPv6 Subnet Prefix Length
•
Enter the subnet prefix length.
IPv6 Gateway
•
Enter the address for the gateway that is used to
route packets that are not on the same subnet.
IPv6 DNS Address Mode
• DHCPv6: no additional settings to specify.
• Manual: Enter the IPv6 DNS Server address.
IPv6 DNS Server
•
Enter the address of the DNS server.
CX100 ComXpert Operation Manual
Network On/Off soft-key to enable
22144015
August 2023