Packing Procedure - Viavi CX100 ComXpert Operation Manual

Chapter 8 Care, Maintenance, and Troubleshooting
Shipping Instructions

8.4.5 Packing Procedure

8.4.5.1 Packaging CX100 for Shipping
The following procedure is for shipping the CX100 or the OneExpert base.
How to Package the device for Shipping
1.
Contact VIAVI to obtain a Return Authorization number, return address and for
questions about proper packaging.
2.
Tag the device.
3. Place device between foam inserts.
4.
Place secured device in shipping container.
5. Seal shipping container with tape.
6.
Include Return Authorization number on the packaging label.
8.4.5.2 Packaging Module for Shipping
The following procedure is for shipping the RF Module independently from the base unit.
How to package the Module for shipping
1. Contact VIAVI to obtain a Return Authorization number, return address and for
questions about proper packaging.
2. Tag the Module.
3. Place Module in ESD protective packaging.
4. Place packaged Module between foam inserts.
5. Place secured Module in shipping container.
6. Seal shipping container with tape.
7. Include Return Authorization number on the packaging label.
CAUTION
Modules are ESD sensitive and should only be installed, removed and/or serviced by
Qualified Service Personnel.
Mise en Garde
Les modules sont sensibles aux DES et ils doivent seulement être installés, enlevés ou
entretenus par du personnel de service qualifié.
Rev 002
8 - 4
CX100 ComXpert Operation Manual 22144015
August 2023