4.3
Configuring 10 MHz Frequency Reference
To Configure CX100 to Use External 10 MHz Frequency Reference
1.
Connect a valid 10 MHz frequency reference to the CX100 10 MHz Frequency
Reference I/O connector.
2.
Power on the CX100.
3.
Open the RF Instrument Menu.
4.
Select the
5.
Select
6.
Press the
To Configure CX100 as a 10 MHz Frequency Reference Source
1.
Connect a 10 MHz frequency reference cable to the CX100 10 MHz Frequency
Reference I/O connector.
2.
Connect the other end to external device.
3.
Power on the CX100.
4.
Open the RF Instrument Menu.
5.
Select the
6.
Select
7.
Press
22144015
August 2023
Freq Reference
button.
External
from the configuration window.
OK button
to confirm and close the configuration window.
Freq Reference
button.
Internal
from the configuration window.
OK button
to confirm and close the configuration window.
CX100 ComXpert Operation Manual
Chapter 4 Configuring System Settings
Configuring 10 MHz Frequency Reference
Rev 002
4 - 9