Chapter 2 Getting Started: Setup and Operation
Powering the Device
2.2
Powering the Device
The CX100 is designed to be powered by an internal battery or by an external AC power
supply.
CAUTION
•
Use only the AC Adapter/Charger supplied with the product. Contact VIAVI for
approved replacement parts.
•
Do not use the AC Adapter/Charger outdoors or in a wet or damp location.
•
Only connect the AC Adapter/Charger to the correct mains voltage indicated on the
ratings label.
Mise en Garde
•
Utilisez uniquement l'adaptateur / chargeur CA fourni avec l'instrument.
•
N'utilisez pas l'adaptateur / chargeur CA à l'extérieur ou dans un endroit mouillé ou
humide.
•
Connectez uniquement l'adaptateur / chargeur CA à la tension secteur correcte
indiquée sur l'étiquette des caractéristiques nominales.
WARNING
Improper grounding of equipment can result in electrical shock. To ensure proper
grounding, this device should only be connected to a grounded AC Power Supply.
Avertissement
La mise à la terre inadéquate de l'équipement peut entraîner un choc électrique. Pour
s'assurer d'une mise à la terre adéquate, cet appareil doit seulement être branché à
une alimentation électrique CA mise à la terre.
2.2.1 AC Power Operation
The CX100 can be powered externally using the provided AC Power Adapter to connect
the device to a grounded AC power supply. The device automatically initiates recharging
the battery when the CX100 is connected to an AC power supply.
To Connect the Device to an AC Power Supply
1.
Connect the power cord to the AC Adapter/Charger.
2.
Connect the DC connector to the device's DC Input Connector.
"DC Input Connector", on page 1-10
3.
Connect the power cord to a grounded AC power supply.
Rev 002
2 - 6
for information.
CX100 ComXpert Operation Manual
See section 1.5.9,
22144015
August 2023