User Information; Help; Notifications; System Network Screen - Viavi CX100 ComXpert Operation Manual

3.1.20 User Information

The User Information panel contains settings used to identify the technician using the
device. Information includes the technician's name and ID as well as the StrataSync
account ID. The information entered on this panel is used when synchronizing with the
StrataSync server.
NOTE
StrataSync is not currently supported on the CX100. Support is planned for future
development.

3.1.21 Help

The Help panel contains VIAVI contact information: phone number; email and website.
Help content can also accessed by pressing the Help button located in the Utility Tray.

3.1.22 Notifications

Error messages and user notifications are displayed in the Utility Tray. When more than
one notification message is displayed, an individual message can be deleted by dragging
the message off the screen. Pressing the Clear All button deletes all notification
messages.

3.1.23 System Network Screen

Network connections are used to update the firmware, transfer files, synchronize to the
StrataSync server, or control the instrument's user interface remotely. The device supports
wired network and intranet, and WiFi connections.
The device supports IPv4, IPv6 and IPv4/IPv6 Dual Stack network modes of operation.
The network controls and settings that are displayed on the screen depend on the
Network Mode and Address Mode that are selected (Static or DHCP).
The device is designed to auto-detect when it is connected to an active network via one of
the CX100 Ethernet connectors.
3.1.23.1 Accessing System Network Screen
The Network panel contains parameters that are used to configure the device for network
access. The Network panel is accessed by selecting the Network button from the
System Menu.
22144015
August 2023
See section 4.2.6, "User Information", on page 4-7
CX100 ComXpert Operation Manual
Chapter 3 System and Utility Function Descriptions
for information
Introduction
Rev 002
3 - 13