Viavi CX100 ComXpert Operation Manual page 102

A lock
Saved, In Range
Saved, Out of Range
Incompatible
Connected
The device automatically connects to the network determined to provide the best available
access point (based on signal strength and/or encryption supported).
To Connect to a Different WiFi network
1.
Select the SSID of the WiFi network.
2. Configure the advanced settings (profile settings), forget a saved network, or connect
to the network.
3. Select the
•
•
The device is connected to the WiFi network.
22144015
August 2023
Connect button.
Messages appear briefly indicating that the device is performing a four-way
handshake, then authenticating to the network.
The status of the connection (Network Up) and details concerning the
connection (IP address, netmask, gateway, and DNS server) appear at the top
right of the menu.
CX100 ComXpert Operation Manual
Indicates authentication is required to connect to a
network.
Indicates that a profile for the network has been saved
on the device, device is in range of the network and a
connection can be established to the device.
Indicates that a profile for the network has been saved
on the device, but the network is out of range and
therefore, a connection cannot be established.
Indicates that a connection cannot be established to a
network.
Indicates that the device has established a connection
to the network.
Chapter 4 Configuring System Settings
Establishing a Network Connection
Rev 002
4 - 15